• USD
  • EUR
  • GBP
  • CAD
  • AUD
  • NZD
  • BRL
  • RUB
Home /Outdoors & Sports /
Outdoor Entertainment
/ X215 PRO 215mm FPV Racing Drone BNF 5.8G 1200TVL CCD / F4 6DOF FC with OSD / BLHeli - S 30A DShot ESC

SKU: 224098802

    X215 PRO 215mm FPV Racing Drone BNF 5.8G 1200TVL CCD / F4 6DOF FC With OSD / BLHeli - S 30A DShot ESC

  • ( 0 Reviews)
  • Color

  • Custom Options

  • Sold out in your size or color?
  • QTY

  • Availability: Out of Stock

Review (0)

There are no reviews for this product. Be the first to comment.

Write A Review

X215 Pro features the latest high-performance components, bringing you unprecedented FPV racing. With 3K carbon fiber material imported from England, reinforced by the aluminum parts, the airframe contributes to much higher maneuverability as well as the marvelous F4 FC and 4-in-1 BLHeli - S 30A DShot ESC. The combination of the most powerful 2206 brushless motors and aerodynamic three-blade propellers generate tremendous thrust for breathtaking high-speed flying. 1200TVL CCD camera, 5.8G video transmitter and pagoda antenna allow you to get the high-quality image and get it transmitted without latency.

Main Features:
Superior 3K carbon fiber frame, 30 percent lighter, 50 percent stronger, with 4mm thick arm, solid aluminum parts
Advanced flight control system consists of FuriBee F4 FC, 4-in-1 BLHeli - S 30A DShot ESC
Efficient propulsion system - 2206 2600KV high KV brushless motor and 5048 three-blade propeller
1200TVL CCD camera, 5.8G FPV from more than 2km away, omnidirectional signal coverage

Brushless motor: 2206 2600KV
Propeller: 5048 three-blade, PC + fiberglass
Video transmitter: 5.8G 40CH 0 / 25mW / 300mW
Antenna type: pagoda antenna
2-in-1 LED buzzer: with four WS2812B LEDs, 4.5 - 5.2V input
Camera mount for GoPro Session: yes

Carbon Fiber Frame
Wheelbase: 215mm
Weight: 95g
Size: 175 x 225 x 60mm
Arm thickness: 4mm
Lateral plate thickness: 1.5mm
Aluminum part width: 5mm

F4 Flight Controller
MCU: STM32F405RGT6 32-bit processor
IMU: ICM20689 ( SPI ), up to 32KHz
Input voltage: 7 - 42V
Supported firmware: BetaFlight ( pre-loaded ), CleanFlight
Integrated OSD: yes
BLHeli - S pass-through: support
Automatic voltage monitoring: yes
BEC output: 5V 1.5A, 3.3V 200mA
Mounting hole spacing: 30.5mm

2-in-1 LED Buzzer Module
LED strip model: WD2812B
Operating voltage: 4.5 - 5.2V

FPV Camera
Image sensor: super HAD II CCD
Horizontal resolution: 1200TVL
TV system: PAL / NTSC
5D-OSD button: yes
Input voltage: 12V DC

Note: the pattern colors ( dark gray and black ) of airframe will be sent randomly.

  • Type: Frame Kit
  • Version: BNF
  • Model: 2206
  • Motor Type: Brushless Motor
  • KV: 2600
Flight Controller
  • Flight Controller Type: F4
  • Video Resolution: 1200TVL ( horizontal )
  • Sensor: CCD
Electronic Speed Controller
  • Firmware: BLHeli-S
  • Continuous Current: 30A
Dimension and Weight
  • Product weight: 0.4900 kg
  • Package weight: 0.6840 kg
  • Product size (L x W x H): 28.00 x 24.00 x 16.00 cm / 11.02 x 9.45 x 6.3 inches
  • Package size (L x W x H): 30.00 x 25.00 x 18.00 cm / 11.81 x 9.84 x 7.09 inches
Package Contents
  • Package Contents: 1 x X215 PRO FPV Racing Drone, 1 x 5.8G Pagoda Antenna, 1 x Camera Mount

Product Safety Disclaimer:
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.
Small Parts Disclaimer:
These toys contain small parts, not for children under 3 years in case of swallowing or choking . We do not accept any responsibility or liability for misuse of this or any other product.

Average Rating:

Base on 0 Customer Reviews
Write a Review
Any customer writing a review can get ZB Points, the first five get DOUBLE ZB POINTS. Share your thoughts with other customers
ALL ( 0 )
PHOTOS ( 0 )
VIDEOS ( 0 )
Get ZB Points! Be the FIRST to Write a Review!

You Might Also Like