$USD
  • USD
  • EUR
  • GBP
  • CAD
  • AUD
  • NZD
  • BRL
  • RUB
Home /Toys /
Toys
/ helifar Turtles 135mm FPV Racing Drone

SKU: 255305802

    Helifar Turtles 135mm FPV Racing Drone - Black

  • ( 0 Reviews)
  • Color

    BLACK
  • Custom Options

    BNF WITH FRSKY RECEIVER KIT WITHOUT RECEIVER PNP WITHOUT RECEIVER
  • Sold out in your size or color?
  • QTY

  • Availability: Out of Stock

Review (0)

There are no reviews for this product. Be the first to comment.

Write A Review
Main Features:
helifar Turtles is an extraordinary micro FPV racing drone with 3mm thick 3K carbon fiber chassis. Compared with smaller multirotors, it is more powerful, due to the 1306 3100KV brushless motor and 3030 four-blade propeller. Therefore, you can enjoy flying it at a high speed outdoors. In comparison with bigger drones, it features higher maneuverability because of the light weight and small size. More importantly, with the RunCam Micro Sparrow camera, you are sure to be satisfied with the real-time FPV.

Note:
The color ( red, blue, black, yellow, purple, white ) of the propeller will be sent randomly.
This version of the F3 flight controller is upgraded to F4 flight controller.


Specification:
- Brand Name: helifar
- Model: turtle
- Wheelbase: 135mm
- Arm Plate Thickness: 3mm
- Bottom Plate Thickness: 3mm
- Side Plate Thickness: 1.5mm
- Material: carbon fiber
- Weight: 38g
- Drone Weight: 120.35g(battery not included )

F4 Flight Controller:
- Micro F4 flight control board ( Dshot version )
- MPU: MPU6000 - SPI
- CPU: STM32F405RGT6, dual 8K
- Input voltage: 2 - 4S Lipo
- Built-in Betaflight OSD to adjust PID
- BEC output: 5V 3A
- Size: 25 x 25mm board, 2mm mounting holes ( M2 )
- Weight: 2.3g
- Support subs / PPM / DSMX receiver

4-in-1 BLHeli-S 20A ESC:
- Input Voltage: 2-4S Lipo battery
- Constant Current: 20A
- Peak Current: 25A
- BEC Output: NO
- Firmware: BLheli_S 16.7
- Size: 27 x 27mm ( main board ); 27 x 31mm ( including pad )
- Installing Hole: 20 x 20mm, M2
- Weight: 4g
- CPU: SILABS EFM8BB2 48MHZ
- MOS Tube: top quality MOSFET
- Support Damped Mode, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Forward and Reverse

Transmitter:
- Output Power: 0mW / 25mW / 200mW switchable
- Control Mode: button
- BAT: 7 - 26V, BEC 5V - 1A
- 200mA - 200mW
- Video System: NTSC / PAL
- Antenna: welding antenna
- Frequency: 5.8GHz 5 bands 40 channels, with raceband: 5645 - 5945 MHZ
- Size: 25 x 25mm( L x W ), hole: 20 x 20mm
- Weight: 2.5g

RunCam Micro Sparrow Camera:
- Image Sensor: 1 / 3 inch CMOS
- Horizontal Resolution: 700TVL
- Lens: 2.1mm ( M8 ), 145-degree FOV
- Aspect Ratio: 16:9
- Integrated OSD: yes
- TV System: PAL / NTSC Switchable
- S/N Ratio: more than 50dB ( AGC off )
- Electronic Shutter Speed: PAL: 1/25 - 100,000s; NTSC: 1/30 - 100,000s
- Auto Gain Control ( AGC ): low / middle / high
- DNR: 2DNR
- Day / Night: EXT / COLOR / BW / AUTO GEN
- Power Supply: 5 - 36V

Motor:
GT1306 3100KV 2-4S

Receiver:
- KIT Version: without receiver
- PNP Version without receiver
- BNF Version: with FRSKY XM receiver
Specification:
Package weight 0.1900 kg Package size (L x W x H) 15.00 x 15.00 x 5.00 cm / 5.91 x 5.91 x 1.97 inches Package Contents
  • Package Contents: 1 x Turtles Drone, 8 x 3030 Propeller, 1 x XT30 Power Cable, 1 x Battery Strap


Color and Style Disclaimer:
The item color and style(or pattern) is subject to stock availability, we reserve the right to substitute for another color/pattern.

Average Rating:

0
Base on 0 Customer Reviews
Write a Review
Any customer writing a review can get ZB Points, the first five get DOUBLE ZB POINTS. Share your thoughts with other customers
ALL ( 0 )
PHOTOS ( 0 )
VIDEOS ( 0 )
Get ZB Points! Be the FIRST to Write a Review!

You Might Also Like