$USD
  • USD
  • EUR
  • GBP
  • CAD
  • AUD
  • NZD
  • BRL
  • RUB
Home /Toys /
Toys
/ helifar X140 PRO Micro Brushless FPV Racing Drone - Black BNF with Frsky Receiver

SKU: 264107202

    Helifar X140 PRO Micro Brushless FPV Racing Drone - Black BNF With Frsky Receiver - Black

  • ( 0 Reviews)
  • Color

    BLACK
  • Custom Options

    BNF WITH AFHDS RECEIVER BNF WITH FRSKY RECEIVER PNP WITHOUT RECEIVER
  • QTY

  • Availability: In Stock Hurry! Only 16 Left!

Review (0)

There are no reviews for this product. Be the first to comment.

Write A Review
Description:
Can you really substitute an FPV racing with a smaller drone? Absolutely. Professional and amateur racers alike want to get a micro drone to hone their skills both indoors and out, just come to see and try our helifar Micro Racing Drone! The carbon fiber frame and F4 flight controller can keep the drone well-balanced in the air, and micro brushless motor and precise transmitter give accurately integrated control of all quadcopter systems. Just strap the battery, bind with your transmitter, and get impressed by the flight performance of the little multirotor.

Main Features:
- Stretch - X 3K carbon fiber frame with 4mm arm plate thickness
- helifar F4 flight controller with MPU6000 - SPI MPU, Betaflight OSD, supports 2 - 4S Lipo
- 5.8GHz 48CH 25mW / 100mW / 200mW switchable transmitter, Support Betaflight OSD adjust power and frequency. PIT MODE is 0 mW for Close-up bind.
- helifar Blheli 32 4-in-1 25A ESC, support Dshot 1200, 1408 3800KV brushless motor
- 2.3mm lens 600TVL CCD camera, 145 degree
- With programmable LED light and 3041 four-blade propeller

Specifications:
Frame:
- Wheelbase: 145mm
- Arm plate thickness: 4mm
- Top and bottom plate thickness: 2mm
- Side plate thickness: 1.5mm
- Material: 3K carbon fiber
- Weight: 49g

F4 Flight Controller:
- Micro F4 flight control board ( Dshot version )
- MPU: MPU6000 - SPI
- CPU: STM32F405RGT6, dual 8K
- Input voltage: 2 - 4S Lipo
- Built-in Betaflight OSD to adjust PID
- BEC output: 5V 3A
- Size: 25 x 25mm board, 2mm mounting holes ( M2 )
- Weight: 2.3g
- Support subs / PPM / DSMX receiver

helifar ESC:
- Input voltage: 2 - 4S Lipo battery
- Constant current: 25A
- Peak current: 30A
- BEC ouput: no
- Firmware: BLheli 32
- Size: 27 x 27mm ( main board ) 27 x 31mm ( including pad )
- Installing hole: 20 x 20mm, M2
- Weight: 4g
- CPU: 32 - bit ARM cortex MCU 48MHz
- MOS tube: top quality mosfet
- Support damped mode, oneshot125, oneshot42, multishot, Dshot150 / 300 / 600 / 1200, forward and reverse

FPV Transmitter:
- Output power: 25mW / 100mW / 200mW switchable
- Support Betaflight OSD adjust power and frequency. PIT MODE is 0 mW for Close-up bind
- Frquency: short press once time to change channel CH ( CH1 - CH8 )
- Power: Long press 10s to inter power switchable mode. The LED light as follow. And short press to change the 25 / 100 / 200mW
- BAT: 7 - 26V, BEC 5V - 1A
- Video system: NTSC / PAL
- Antenna: RPSMA
- Frequency: 5.8GHz, 5 bands, 48channels with raceband: 5362 - 5865MHz
- Size: 24 x 24mm ( L x W )
- Hole: 20 x 20mm
- Weight: 2.4g

5.8G 600TVL CCD Camera:
- Image sensor: 1 / 3 inch SONY super HAD II CCD
- Horizontal resolution: 600TVL
- Lens: 2.3mm
- FOV: 145 degree ( 2.3mm )
- Signal system: PAL / NTSC
- S / N ratio: more than 60dB ( AGC OFF )
- Electronic shutter speed: PAL: 1 / 50 ~ 100000; NTSC: 1 / 60 ~ 100000
- Autogain control ( AGC ) : yes
- Back light compensation ( BLC ): yes
- Illumination: Min. 0.01lux / 1.2F
- WDR: D - WDR
- DNR: 2DNR
- Day / Night: color / auto / B and W
- Power: DC 5 to 36V

5.8G Antenna:
- Omnidirectional antenna
- Frequency: 5600 - 6000MHz
- VSWR: less than 1.2 at 5800GHz
- Gain: 2.8dBi
- Impedance: 50ohm
- Polarization modes: vertical
- Interface: SMA, RP - SMA
- Weight: 4g
Specification:
General
  • Brand: helifar
Product weight 0.1620 kg Package weight 0.3063 kg
Package size (L x W x H) 16.00 x 16.00 x 5.00 cm / 6.3 x 6.3 x 1.97 inches
Package Contents
  • Package Contents: 1 x X140 PRO Drone, 8 x Propeller, 4 x Battery Tie, 1 x Power cable, 2 x Heat Shrink Tubing, 1 x Camera Lens Cover

helifar X140 PRO Micro Brushless FPV Racing Drone - Black BNF with Frsky Receiver

helifar X140 PRO Micro Brushless FPV Racing Drone - Black BNF with Frsky Receiver

helifar X140 PRO Micro Brushless FPV Racing Drone - Black BNF with Frsky Receiver

helifar X140 PRO Micro Brushless FPV Racing Drone - Black BNF with Frsky Receiver

helifar X140 PRO Micro Brushless FPV Racing Drone - Black BNF with Frsky Receiver

helifar X140 PRO Micro Brushless FPV Racing Drone - Black BNF with Frsky Receiver

Product Safety Disclaimer:
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.
Small Parts Disclaimer:
These toys contain small parts, not for children under 3 years in case of swallowing or choking . We do not accept any responsibility or liability for misuse of this or any other product.

Average Rating:

0
Base on 0 Customer Reviews
Write a Review
Any customer writing a review can get ZB Points, the first five get DOUBLE ZB POINTS. Share your thoughts with other customers
ALL ( 0 )
PHOTOS ( 0 )
VIDEOS ( 0 )
Get ZB Points! Be the FIRST to Write a Review!

You Might Also Like